Customized Cyclone Recovery System Recycler for Powder Coating Machine
- Recycle device is consist of upper box and lower box.
- Starting soft joint to seal between upper box and lower box, the lower box is movable so as to exchange and clean filter element.
- Recycle fan is set in the upper box. Equipment noise is less than 85dB (standard of China).
- Recycle system use two sets of filter devices (filter element and final filter). Exhausting tail gas is less than 10mg/m³ (standard of China).
- Filter element is made from polyester waterproof antistatic material, and it is set in the lower recycle box.
- Blowback self-cleaning device in the recycle system can clean stockpiled powder of filter element efficiently.
- Blowback device is made of electron order control instrument and pulse membrane valve.
- The automatic powder recycle system is located at the bottom of the powder saver. Recycled powder is transported by a powder recycle pump into an electric powder filter, where it is screened and returned to the powder supply bucket. Here, it is evenly mixed with new powder after fluidization.
- At the end of a shift, the recycle fan is turned off, allowing the pulse blowback self-cleaning system to operate either singly or repeatedly to thoroughly clean the recycle filter elements.
| No. | Item | Parameter and description |
| 1 | Model | CHG-HS-7000 |
| 2 | Number of filter element | 5 pieces |
| 3 | Specification of filter element | ∮325×660mm |
| 4 | Material of filter element | waterproof polyester |
| 5 | Filter precision of filter element | 5μm |
| 6 | Model of fan | 4-72-4.0A |
| 7 | Model of motor | Y132S1-2-5.5kW 3~380V 50Hz |
| 8 | Recycling air | 6500m3/h |
| 9 | Cleaning form of filter element | Pulse automatic blowback |
| 10 | Voltage of blowback valve | DC24V |
| 11 | Blowback pressure | 0.4~0.5MPa |
| 12 | Sealing way between upper and lower box of saver | Air sealing |
| 13 | Moving way of lower box of saver | Manual movement |
