CHG International Limited
Your Trusted Partner in the Metal Surface Treatment Industry
Add to Cart
Powder Coating Equipment Automatic Electrostatic Spray Gun For Metal Surface Treatment
1. System component: automatic powder spraying gun, static controller, powder absorption pump, a whole set of electric channel pipeline.
2. Automatic static powder spraying gun is a built-in high-pressure structure. Increasing electrostatic field can prevent static leak.
3. If the automatic static powder spraying gun increases three times air, powder will spray more evenly, and gun head will keep clean.
4. To prevent powder from accumulating and getting block, powder bucket is fluidization bed style structure.
5. Powder absorption pump uses two-times air style, so powder will spray more evenly and stably.
| No. | Item | Parameter |
| 1 | Voltage input | ~220V 50~60 Hz |
| 2 | Voltage output of static generator | DC24V |
| 3 | Voltage output of powder spraying gun | 0-100kV continuously tunable |
| 4 | Current output | ≤100μA |
| 5 | Polarity | negative |
| 6 | Spraying gun weight | 500g |
| 7 | Powder output | 0-400g tunable |
| 8 | Compressed air consumption | Max0.25Nm3/min |
| 9 | Powder bucket volume | 25kg |
| 10 | Pipeline length | By actual demand |
| 11 | Protection degree | IP54 |
